不锈钢都可以水下焊接？来看看水下不锈钢焊条啥样，瞬间长姿势

假货BROCO的SS-1钢制水底铜焊包装袋及铜焊相片

一、BROCO水底铜焊Softouch系列产品SS-1水底铜焊包装袋相片。此种SS-1的钢制水底铜焊反之亦然和EZ-1的一般不锈钢水底铜焊那样，均选用基础建设的美国BROCO水底乌兹县BR-21和BR20冲压采用，假如是沉陷控制器能选用威欧丁250的手持式TNUMBERFK冲压采用。

二、SS-1钢制水底铜焊相片，药皮由三层镀层组成：镀银层，药皮层，镀蜡层组成，在水中作业或者带水作业不会灭弧，能选用自耗式冲压，轻轻将铜焊放置于冲压部位拉直线冲压即可，能不用像陆地上将铜焊离开工件然后靠电位差起弧，所以此种自耗式的BROCO水底铜焊能保证了在有些管道抢修过程中有压力的情况下，将铜焊堵住漏点然后用铜焊的尖端磨蹭母体将端部镀蜡层弄掉，然后继续贴住母体左右晃动几下即可起弧，铜焊完全接触工件即可起弧，这样能更加好地顶住管道中的压力。

Softouch系列产品下的SS-1钢制水底铜焊的英文概述

Brocos flux enhancing proprietary formulation, BroCote, is the secret behind the reliability and ease of operation of the SofTouch® electrode. BroCote makes this electrode particularly impervious to water penetration and denigration and ensures certifiable underwater weld quality with less labor cost and time consumption.

SofTouch® electrodes are used for on-site repairs in many applications where steel must be joined underwater according to code specifications. SofTouch® welds consistently meet or exceed AWS D3.6-98 specifications for Type B welds, the American Welding Societys standard for certifying underwater welds. SofTouch® is designed to pass all AWS test requirements, including radiograph, bends and hardness and is the wet welding electrode welding engineers and divers prefer.

Since 1989, SofTouch® electrodes have been specified in the U.S. Navys Ships Husbandry Manual Chapter 11, "Underwater Wet and Dry Chamber Welding." U.S. and Navy diving commands, shipyards, and contractors use SofTouch® for repairs and maintenance on Naval vessels worldwide.

SofTouch® electrodes are available in various sizes and alloys for both mild steel and stainless. SofTouch® mild steel electrodes are available in 1/8 inch, 5/32 inch and 3/16 inch diameters. Stainless electrodes are sold in 1/8 inch and 5/32 inch sizes.

SofTouch® wet welding electrodes are sealed in a Mil-Spec foil pouch to prevent contamination. The electrodes are then packaged in a rigid resealable plastic tube which provides maximum protection. The color-coded end cap denotes mild or stainless steel electrodes. Operating guidelines are printed on the label.

Softouch系列产品下的SS-1钢制水底铜焊的中文概述

更容易得到质量保证的焊缝

采用BR-20水底专用乌兹县配以SofTouch系列产品下的SS-1钢制水底铜焊，湿式冲压就容易进行。不论用自消耗式或者操纵式技术，这些平稳地工作的电铜焊不需要或者只需要极小的压力。SS-1钢制水底铜焊产生更热的电弧，导致更好的流动，正确的穿透和更高的焊着率。

Broco专有的二元焊剂有效地从电弧环境减少气态氧和氢，减少发生氢破裂的可能性。

Broco全力支持高质量的湿式冲压，在任何位置都首先做得到。不论潜水员是持续地修理离岸结构，港口装置或者远洋船只，高质量冲压就等于是缩短完成这个任务的时间和减少费用。

经认可的性能

1968年以来，SofTouch系列产品已被列为ANU（经认可用于海军）。美国海军指挥机构和海军船坞一直采用SofTouch下的SS-1水底铜焊在世界上的海军舰艇上进行修理和维护工作。

对于在核设施上进行就地修理，或者对于必须按照规范说明书来连接钢制、合金钢及异种钢等用途，SofTouch系列产品下的SS-1水底铜焊是正确的选择。

SofTouch系列产品下的SS-1钢制水底铜焊是优质湿式冲压电铜焊

Broco Underwater SofTouch系列产品下的SS-1钢制水底电铜焊能达到很高水平的对于湿式冲压焊缝的X光照相和机械检验结果，在所有位置（水平焊的，垂直焊的和仰焊的）冲压都符合或者操作AWS D3.6标准。

SofTouch系列产品下的SS-1钢制水底铜焊能有1/8英寸（3.2mm）和5/32英寸（4.0mm）两种直径。

SofTouch湿式冲压电铜焊包装袋在钢性的可重新密封塑料管内，以得到很好的保护。彩色编码的端帽指示出是低不锈钢的或者钢制的电铜焊操作指南印刷在标签上。